Immediate answers if you were hurt in a jackknife truck accident in Texas
What is a jackknife accident? A jackknife accident is a crash in which the tractor and trailer of a commercial truck fold toward each other, forming a sharp “V” or “L” shape. The driver loses the ability to steer or brake effectively, and the truck can sweep across multiple lanes of traffic. On high-speed Texas interstates like I-10, I-20, I-35, and I-45, this creates a dangerous situation for passenger vehicles nearby.

This guide is for people hurt in a Texas jackknife crash and for their families. It covers the two types of jackknife, the causes, the federal rules, the evidence, and who may be liable. When a jackknifed truck collides with smaller vehicles or blocks the roadway, the size difference between a tractor-trailer and a car can lead to serious injuries. Victims may also face complex insurance questions, because a commercial truck crash can involve policies tied to the driver, the trucking company, and other parties.
The top priority after a jackknife accident is safety: call 911, get medical attention even if you feel fine, and see the steps at the end of this guide before you talk to any insurer.
What is a jackknife truck accident?
A jackknife accident occurs when the tractor and trailer fold toward each other at a sharp angle, like a folding pocketknife. A commercial truck such as an 18-wheeler consists of a tractor (the cab with the engine and drive wheels) and a semi-trailer connected by a fifth wheel coupling. Under normal conditions, the two track in line.
In a jackknife, loss of traction at the drive or trailer axles causes the trailer to swing. Once that swing begins, the truck driver can lose control of the steering wheel. Many jackknife accidents happen at highway speed, where a sliding trailer can block multiple lanes and cause secondary collisions. Stopping distances are long and other drivers have little time to react, so a single jackknife can turn into a chain of car and truck accidents.
Jackknife crashes are one kind of semi truck accident. In a rollover the truck tips onto its side, while in a jackknife the tractor and trailer fold at the coupling. Large trucks are much heavier than a passenger car. Under 23 CFR 658.17, a fully loaded semi truck on the Interstate System can weigh up to 80,000 pounds, unless the bridge formula sets a lower limit. When a jackknifed truck strikes a smaller vehicle, the people in the car can take most of the force.
Types of jackknife accidents: tractor jackknife vs trailer jackknife
The FMCSA Commercial Driver License Manual describes two types: tractor jackknife and trailer jackknife. Both create a dangerous angle between the tractor and trailer, but they begin in different parts of the vehicle and have different causes.
| Point | Tractor | Trailer |
|---|---|---|
| Starts at | Drive axle locks or slips | Trailer axle locks |
| Movement | Trailer pushes the cab sideways | Trailer swings around |
| Risk rises | Hard braking or speeding up | Empty or light trailer |
Either type of jackknife accident can quickly turn into a multi-vehicle crash or an underride collision for nearby passenger cars.
Tractor jackknife: how it happens and what it looks like
A tractor jackknife occurs when the drive wheels lock or lose traction. The FMCSA manual says a drive-wheel skid “can let the trailer push the towing vehicle sideways, causing a sudden jackknife,” and names excessive braking or acceleration as the cause of that skid. Sudden braking on wet or icy roads across Texas raises the risk of a truck jackknife accident.
A tractor jackknife can sweep the truck across several lanes, blocking traffic and trapping passenger vehicles between the trailer and a median or barrier. The manual says antilock braking systems lower the chance of a jackknife and tells drivers to brake early. For people in other vehicles, the main danger is being struck by the swinging tractor-trailer or being unable to avoid the blocked roadway in time.
Trailer jackknife: how cargo, braking, and road conditions contribute
A trailer jackknife begins when the trailer wheels lock. The FMCSA manual says that when this happens “the trailer will tend to swing around,” and that this “is more likely to happen when the trailer is empty or lightly loaded.” The trailer skids and swings out to one side while the tractor and cab continue straight, and this kind of jackknife accident can sweep a trailer into a neighboring lane.
Speed too fast for weather conditions on rain-slicked or icy bridges and overpasses in Texas can contribute to a trailer swing. Improperly distributed or unsecured cargo can shift during braking or lane changes, which federal cargo rules treat as a stability problem. Once the trailer starts to swing, nearby drivers may have almost no time to react.
Common causes of jackknife accidents under federal safety rules
Investigators compare what happened in a crash to what federal and state trucking rules required. Common causes of jackknife accidents include:
- Hard or improper braking, and locked drive or trailer wheels.
- Speed too fast for conditions.
- Empty or lightly loaded trailers.
- Poorly distributed or unsecured cargo, or an overloaded truck.
- Worn or out-of-adjustment brakes, equipment failure, or a tire blowout that destabilizes the truck.
- Driver fatigue.
A jackknife can happen when the truck driver or trucking company did not adjust driving or maintenance to the circumstances. Each cause on this list ties to a federal rule described below.
How jackknife accidents lead to underride crashes and multi-vehicle pileups
When a trailer swings sideways across a roadway, it can create a wall-like obstruction. Following vehicles, including passenger cars, may have no room to stop or swerve, particularly in low light, heavy rain, or nighttime conditions. Secondary collisions can expand the crash beyond the initial impact, and a jackknife accident at night can involve several cars before traffic stops.
An underride accident occurs when a passenger vehicle slides under the rear or side of a trailer, and the trailer intrudes into the passenger compartment. Federal rules require rear impact guards on many trailers. A missing, bent, corroded, or improperly installed rear guard may fail to stop an underride collision when a passenger car strikes the back of a jackknifed truck.
How underride crashes happen depends on where the car meets the trailer. Rear underride crashes happen when a car strikes the back of the trailer, which is the area rear guards protect. Side underride crashes happen when a car strikes the side of a trailer that has swung across the road, an area the rear guard rules in Section 393.86 do not cover. In either underride crash, the trailer can pass over the hood and strike the car’s windshield and roof.
Injuries from underride and jackknife truck accidents
Underride accidents and other jackknife collisions can cause serious injuries and fatalities. Severe injuries in truck accidents can include traumatic brain injuries, neck injuries, spinal cord injuries, broken bones, and internal injuries. Anyone hurt in a car crash with a large truck should get medical attention, because adrenaline can mask pain and some injuries do not show symptoms right away.
Federal safety standards relevant to jackknife and underride accidents
Federal regulations in Title 49 of the Code of Federal Regulations set minimum safety standards for commercial motor vehicles. These cover brakes, antilock braking systems, and rear impact guards (Part 393), cargo securement (Part 393 and Section 392.9), driver hours (Part 395), and inspections (Part 396). A Texas truck accident lawyer may examine whether any of these rules were broken when investigating a jackknife truck accident.
A rule violation does not automatically prove civil liability, but it can support a personal injury claim when it is connected to the cause of the truck crash.
Brake systems, ABS, and rear guards: 49 CFR Part 393
Faulty or poorly maintained brakes can contribute to a jackknife. 49 CFR Part 393 sets these requirements:
- 393.40(a): A commercial motor vehicle must have brakes adequate to stop and hold it.
- 393.48(a): All brakes with which a vehicle is equipped must at all times be capable of operating.
- 393.55: Antilock brake systems are required on truck tractors manufactured on or after March 1, 1997, and on other air-braked commercial motor vehicles, including trailers, manufactured on or after March 1, 1998. The FMCSA manual says ABS lowers the chance of a jackknife.
- 393.86: Rear impact guards are required on trailers and semitrailers with a gross vehicle weight rating of 10,000 pounds or more manufactured on or after January 26, 1998, with listed exceptions. Missing or damaged guards can be evidence in underride accidents.
Cargo securement and shifting loads: 49 CFR 393.100 through 393.136
How cargo is loaded and secured can affect vehicle stability. Under 49 CFR 393.100(c), cargo must be contained, immobilized, or secured to prevent shifting “to such an extent that the vehicle’s stability or maneuverability is adversely affected.” Separately, Section 392.9 bars a driver from driving, and a carrier from requiring it, unless the cargo is properly distributed and adequately secured.
Unsecured cargo can shift during abrupt braking and push the trailer, contributing to a jackknife accident. Responsibility for compliance may involve the trucking company, the truck driver, and third-party cargo loaders, so a jackknife accident tied to a shifting load can point to more than one party. For more on that question, see liability for unsecured cargo crashes.
Driver fatigue and hours of service: 49 CFR Part 395
Fatigue can slow reaction time and lead to improper braking or speeding. Under 49 CFR 395.3, a property-carrying driver may drive up to 11 hours within a 14-hour window after 10 consecutive hours off duty, must take a 30-minute break after 8 hours of driving, and may not drive after 60 or 70 hours on duty in 7 or 8 consecutive days. Exceptions apply.
Under Section 395.8, a motor carrier generally must require its drivers to record duty status with an electronic logging device, and must keep records of duty status and supporting documents for at least 6 months. ELD data, logbooks, fuel receipts, and dispatch records can show whether a driver exceeded the limits or falsified records before a jackknife truck accident.
Required inspections and maintenance: 49 CFR Part 396
Jackknife accidents tied to brake failures, worn tires, or other mechanical issues may reflect violations of 49 CFR Part 396. Under Section 396.3, motor carriers must systematically inspect, repair, and maintain their vehicles and keep maintenance records. Under Section 396.11, drivers must prepare a written report at the end of each day’s work listing any defect found in parts that include the service brakes, trailer brake connections, tires, and coupling devices.
Under Section 396.17, each commercial motor vehicle, including each tractor and trailer in a combination, must pass a periodic inspection at least once every 12 months. Inspection reports, repair invoices, and maintenance logs can show whether a carrier ignored or delayed needed brake or ABS repairs.
Extreme caution in hazardous conditions: 49 CFR 392.14
Federal law requires “extreme caution” from commercial drivers when hazardous conditions affect visibility or traction. Under 49 CFR 392.14, conditions such as snow, ice, sleet, fog, mist, rain, dust, or smoke require the driver to reduce speed, and if conditions become sufficiently dangerous, to stop driving until the truck can be safely operated.
Driving at the posted speed limit can still be too fast for conditions under this rule. Failing to slow down on wet Texas highways, continuing into a storm at normal speed, or pressing on across black ice on bridges and overpasses can be evidence of negligence. Investigators may compare weather reports, dash cam footage, and engine control module data to the driver’s speed and braking. Read more about weather and truck crash liability.
Key evidence in a jackknife truck accident case, including ECM data
A jackknife accident leaves physical and electronic evidence beyond a standard police report, and preserving it early matters. Get a copy of the police report, because it documents the scene, the responding officer’s observations, and initial findings about the crash.
Key evidence sources include:
- Scene photographs, skid marks, and vehicle damage patterns, which help show the path and speed of each vehicle.
- Dash cam footage, nearby surveillance cameras, and eyewitness accounts.
- Engine control module (ECM) data, which can record pre-crash speed, brake application, throttle position, and fault codes.
- ELD data, GPS records, bills of lading, maintenance files, and cargo load documents.
- Analysis by accident reconstructionists, who study the physical and electronic evidence to determine what happened and why.
A trucking company may repair a truck or put it back into service quickly after a jackknife accident, so a prompt legal request to preserve the tractor, trailer, ECM data, and records can be important.
Who may be liable in a jackknife truck accident?
Liability in a jackknife truck accident can involve multiple parties. Federal trucking regulations show which duties each party carried, and potential defendants include:
- The truck driver, who may be liable for driving recklessly, driver error, or failing to adjust speed for conditions.
- The trucking company, which may share liability for truck driver negligence and for its own hiring, training, scheduling, or maintenance practices.
- Third-party cargo loaders or shippers, when improper loading contributed to a cargo shift.
- A maintenance or repair shop, when faulty repairs contributed to equipment failure.
Texas law and federal regulations interact. A federal rule violation does not automatically decide liability, but it can be evidence that a truck driver or trucking company failed to act with reasonable care.
When more than one party contributed, each may be held accountable for its share. A personal injury claim can seek to recover damages for medical expenses, lost wages, property damage, and other damages the law recognizes. For the general rules, see this guide to truck accident liability.
How a Texas truck accident lawyer may analyze liability in a jackknife crash
A lawyer handling Texas 18-wheeler crash claims may review crash reports, interview witnesses, inspect the vehicles, and work with accident reconstructionists. Counsel may also review driver qualification files, hours-of-service records, ECM and ELD data, maintenance records, cargo documents, and company safety policies to see whether negligence by the driver, carrier, loader, or repair facility contributed to the crash.
The lawyer’s role includes identifying all potential defendants and insurance policies, evaluating how Texas law applies, and advising the injured person on options. Some cases resolve through insurance negotiations, while others require litigation. Each case depends on its specific facts.
What to do after a jackknife accident involving a tractor-trailer in Texas
After a jackknife accident, move to safety if your car can be driven and it is safe to do so. Set out emergency flares or triangles to warn oncoming traffic only if you can do so without putting yourself at risk. Then follow these steps after a truck crash:
- Call 911 for medical help and to bring law enforcement to the scene.
- Cooperate with police and give factual statements for the police report.
- Get medical attention for any injuries, even ones that seem minor.
- Photograph and video the scene, and collect witness contact information, if it is safe to do so.
- Note the trucking company name, USDOT number, and license plates.
- Keep copies of medical records, bills, and any communication from insurers or the trucking company.
- Do not admit fault or discuss the accident with insurance adjusters before you understand your rights.
How Zinda Law Group can help after a jackknife truck accident
Zinda Law Group represents people injured in large truck accidents in Texas, including jackknife and underride crashes, and handles Houston 18-wheeler crash cases. The firm’s work may include investigating the crash, preserving ECM and ELD data, reviewing federal regulation compliance, dealing with insurers, and preparing a claim or lawsuit when appropriate.
If you or a family member were hurt in a jackknife truck accident, or you lost someone in a crash, request a free case evaluation or call 800-863-5312. No Win, No Fee.
Founder and CEO
John C. (Jack) Zinda
Jack founded Zinda Law Group and focuses his practice on catastrophic personal injury, 18-wheeler accidents and wrongful death.
